Item Type Dia of roll Working length of rolls(mm) Max gap(mm) Roll speed ratio Working linear speed of front roll(m/min) Capacity per. batch (kg) Motor power (kw) Overall dimension(mm) Weigh(kg) X(S)K-360B Ø360mm 900mm 10mm 1:1.25 16.25 20-25 30 2800×1850×1750 6000 X(S)K-400B Ø400mm 1000mm 10mm 1:1.27 20 20-35 45 2900×1900×2070 7500 X(S)K-450B Ø450mm 1200mm 15mm 1:1.27 23.2 25-50 55 3300×1700×2000 10500 The machine is new-type rubber mixing machine with double rollers. Transmission[...]

This bale splitter is mainly used to cut the natural rubber, synthetic rubber, and other plastics materials, especially it is suitable to be installed near the rubber mixer to cut small piece of rubber. This bale splitter mainly consists of rubber knife, frame, cylinder, base, auxiliary table, hydraulic system, and electric system. The lead is casted on the base under the rubber knife for protecting the edge of the rubber knife. When cutting the raw rubber, put the raw rubber under the rubber[...]

This vulcanizing machine is used for all kinds of vulcanizing mould, rubber and plastic mould products, and non-mould products. Being a column structure and downward pressing type, the heating plate opens by the self-weight of the heating plate, platform and plunger. The rising of the plunger makes the heating plate close while the hydraulic oil provides the pressure. This engine base is combined together with the cylinder and base frame, which is made of ductile iron to increase the cylinder intensity[...]

The machine applies to sulfurizing various kinds of rubber and plastic model products as well as non-model products. The machine is in frame structure with below pressing form (upwards). Under the working hydraulic pressure, the embolism ascends to make hot plate close for getting pressure, while the embolism descends (namely hot plate turning on) by deadweight of hot plate, platform and embolism to drive working fluid to fuel reserve tank to achieve the aim of descending (namely turning on). Made[...]